WE OUTSIDE DTF READY TO PRESS

Sizes are measured by width not length. Only one transfer from photo is purchased 

Pressing Instructions:

Pressure Setting
Medium Pressure

Temperature
Cotton and 50/50 Blends**: 182°C (360°F)
Synthetic or Polyester Fabrics**: 182°C (360°F)

Press
Cotton and 50/50 Blends: 12 seconds
Synthetic and Polyester Fabrics: 6 seconds

Press the transfer to the fabric for the specified time based on the fabric type.

Hybrid Peel
Peel while still hot or after it has cooled, in one continuous, smooth, rapid motion

For Enhanced Durability

Cover the image with parchment paper after peeling the film off.
Press again for 5 seconds.

Iron-On Instructions:

Temperature: Set to the highest setting on your iron.
Press for 20 to 25 Seconds: Apply even pressure to all parts of the design with the iron, pressing evenly for 20 to 25 seconds onto the garment.
Hybrid Peel: Peel while still hot or after it has cooled, in one continuous, smooth, rapid motion.

DTF Print Aftercare Instructions

Wait 24 Hours: Allow the print to set for at least 24 hours before the first wash.
Wash Inside Out: Turn the garment inside out to protect the design.
Cold Water Wash: Use cold water and a gentle cycle to preserve the print.
Mild Detergent: Avoid harsh detergents and bleach. Opt for mild, color-safe detergents.
Avoid Fabric Softeners: Do not use fabric softeners as they can degrade the print.
Hang Dry: Air drying is recommended. If using a dryer, tumble dry on low heat.
Do Not Iron Directly: Avoid ironing directly on the print. If necessary, place a cloth over the design and use a low heat setting.